Profile: 200L plastic bucket with a light weight, high strength, corrosion resistance, etc., suitable for containing liquid and powdery solid, used in chemical, pharmaceutical, food, brewing, paint and other industries.

Standards compliant:

• GB1891-2008 "packing containers of dangerous goods packed in plastic pail."

• IMDG CODE "International Maritime Dangerous Goods Code"

• "About Recommendations on the Transport of Dangerous Goods Model Regulations" (United Nations)

The main advantages:

• High molecular weight high density polyethylene resin primary blow molding products integrated high strength, corrosion resistance, good health, safe and reliable.

• be dressed Ⅰ, Ⅱ type of dangerous goods, liquid containing maximum density 1.8g / cm3.

• can withstand greater mechanical stress. In the process of moving in road and maritime transport, to achieve the best safe transport of the barrel.

• pour a small amount of residual post, easy to clean and can be repeatedly used, saving energy, but also conducive to environmental protection.

• Use low cost. After using lye or cleaning agent available, then repeated use, clean-up costs lower than the drums, which greatly reduce the cost of the barrel, dimensions conform to international container transport, 20-foot container can hold 80, improve space utilization and reduce transportation costs.

• use, easy to operate, can be the same as lifting and stacking like drums, barrels can be stacked three high.

• Operating temperature: -20 ℃ -50 ℃.

Performance:

• Drop test: -18 ℃ 24 hours, 1.8m drop, not broken, do not leak.

• airtightness test: 20Kpa pressure, held for 5 minutes, no break, no leakage.

• Hydraulic test: 100 Kpa pressure for 30 minutes, no break, no leakage.

• Stacking test: stacking height of 3m, 40 ℃ holding 28 days, no significant deformation and breakage.